Automotive cable FLRY-B
1-pin automotive cable with reduced insulation wall thickness and asymmetrical conductor construction.
Optionally with single-, two- or three-colour insulation. Available in various cross-sections.
Used e.g. for various applications (vehicle electrical system, engine compartment, headlamps, …)
Automotive cable FLRY-B
The 1-pin automotive cable consists of single-, two- or three-colour PVC insulation and a conductor of bare, soft-annealed electrolytic copper CU-ETP1 according to DIN EN 13602.
You can choose from the various versions listed in the table below; versions marked as preferred type *) are produced in larger quantities and kept in stock. This usually results in a lower price and/or shorter delivery times.
One, two or three of the following colour codes must be added to the item number.
00 pink, 0 natural, 1 grey, 2 white, 3 red, 4 black, 5 blue, 6 yellow, 7 violet, 8 brown, 9 green, 33 orange
Example: FLRY-B 1,0 mm² blue: “013 127 010 5”
Variants
| Cross-section [mm²] | PU | Item no. |
|---|---|---|
| 0,5 | 500 | 013 127 005 + colour code |
| 0,75 | 500 | 013 127 007 + colour code |
| 1,0 | 500 | 013 127 010 + colour code |
| 1,5 | 500 | 013 127 015 + colour code |
| 2,5 | 400 | 013 127 025 + colour code |
| 4,0 | 200 | 013 127 040 + colour code |
| 6,0 | 200 | 013 127 060 + colour code |
Any
questions?
Customer service
[Technical sales]